LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Endgate Weatherstrip Replacement >> Removal Procedure

Removal Procedure

  1. Swing the tire carrier fully outward.
  2. Open the endgate.
    3. Fig 1: Endgate Opening Pinch-Weld Weatherstrip
    GM1412531Courtesy of GENERAL MOTORS CORP.
  3. Remove the weatherstrip from the endgate opening pinch-weld flange.
scientia non olet · About LEMON Manuals