Removal Procedure

Open the spare tire carrier.
Open the endgate to a 45-degree angle.

Fig 1: Endgate Support Cable

GM1486510

Courtesy of GENERAL MOTORS CORP.

Release both right and left hand cables from the side panel cable bolts.

Fig 2: View Of Bolts & Endgate Trunnion

GM1428255

Courtesy of GENERAL MOTORS CORP.

Lift the right side endgate off the endgate trunnion (2).
Remove the left side of the endgate off the left side trunnion.
Place the endgate on a clean, dry surface.

Fig 3: Latch And Related Components

GM1428254

Courtesy of GENERAL MOTORS CORP.

Remove the following parts:
- Lower trunnion
- Endgate latch assembly (2)
- Endgate handle bezel
- Endgate handle/lock rods
- Endgate cap
- Endgate liner