LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Endgate Lower Hinge Replacement - Endgate Side >> Removal Procedure

Removal Procedure

    Fig 1: Remove/Install Endgate From Vehicle
    GM1412520Courtesy of GENERAL MOTORS CORP.
  1. Remove the endgate from the vehicle. Refer to Endgate Replacement .
  2. Place the endgate on a protected surface.
    3. Fig 2: Hinge Trunnion Bolts
    GM1412527Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts retaining the hinge trunnion to the endgate.
  4. Remove the hinge trunnion from the endgate.
scientia non olet · About LEMON Manuals