LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 1719 (Antilock Brake System - Non-Hybrid Greater Than/Equal To 3900 Kg (8600 Lb) GVW With TCS & VES) >> Diagnostic Information and Procedures >> DTC C0186 or C0196 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition On, verify that DTC U2142 or C0292 is not set.
  2. With a scan tool, clear the DTC.
  3. Test drive the vehicle while observing the scan tool Yaw Rate and Lateral Accelerometer Sensor parameter. The parameters should vary as the vehicle changes directions.
    • If the parameters are locked or erratic, replace the yaw/lateral accelerometer sensor.
  4. Replace the EBCM.
scientia non olet · About LEMON Manuals