LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 1719 (Antilock Brake System - Non-Hybrid Greater Than/Equal To 3900 Kg (8600 Lb) GVW With TCS & VES) >> Diagnostic Information and Procedures >> DTC C0131 (Without JL4) >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The electronic brake control module (EBCM) monitors the brake pressure sensor. The information the EBCM receives from the brake pressure sensor is sent through serial data circuits to the trailer brake control module (TBCM). The TBCM uses this information to perform trailer brake functions. The brake pressure sensor is mounted to the master cylinder.

scientia non olet · About LEMON Manuals