Door Ajar Indicator Malfunction

Step	Action	Yes	No
Schematic Reference: Door Control Module Schematics Connector End View Reference: Vehicle Access Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Open and close the driver and passenger doors one at a time while monitoring the driver information center (DIC) display. Do the door ajar indicators operate properly?	Go to Testing for Intermittent Conditions and Poor Connections	Go to Step 3
3	Do the courtesy lamps operate properly with the opening and closing of each of the doors?	Go to Step 4	Go to Courtesy Lamps Inoperative
4	Replace the instrument panel cluster (IPC). Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement?	Go to Step 5	-
5	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3