Trim Panel Replacement - Instrument Panel (I/P) Center

TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) CENTER

REMOVAL PROCEDURE
1. Loosen and remove the center console for access to the center trim panel.




2. Remove the screws that hold the trim panel to the I/P.
3. Remove the trim from the tabs in the I/P .

INSTALLATION PROCEDURE
1. Align the trim pad with the I/P tabs.




2. Fasten the trim panel to the I/P.

NOTE: Refer to Fastener Notice in Service Precautions

Tighten the screws to 2 N.m (18 lb in).