Trim Plate Replacement - Instrument Panel (I/P) Accessory Right

Trim Plate Replacement - Instrument Panel (I/P) Accessory Right

Removal Procedure





1. Remove the I/P (Instrument Panel) compartment. Refer to Compartment Replacement - Instrument Panel (I/P) (Compartment Replacement - Instrument Panel (I/P)) .
2. Remove the I/P assist handle. Refer toInstrument Panel (I/P) Assist Handle Replacement (Instrument Panel (I/P) Assist Handle Replacement) .
3. Remove the screws that hold the trim panel to the I/P.
4. Remove the trim from the tabs in the I/P.



Installation Procedure





1. Align the trim pad with the I/P substrate tabs.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the trim panel screws.

Tighten the screws to 2 Nm (18 lb in).

3. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) (Compartment Replacement - Instrument Panel (I/P)) .
4. Install the I/P assist handle. Refer toInstrument Panel (I/P) Assist Handle Replacement (Instrument Panel (I/P) Assist Handle Replacement) .