Striker Replacement - Instrument Panel (I/P) Compartment

STRIKER REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT

REMOVAL PROCEDURE
1. Open compartment door to expose compartment striker bracket.
2. Loosen screws/bolts holding striker bracket to I/P.




3. Remove striker bracket assembly from I/P.

INSTALLATION PROCEDURE




1. Install striker bracket to instrument panel subscript loosely.
2. Align striker with I/P compartment door and tighten striker bracket in place.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1.6 N.m (14 lb in).