LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Transmission Mount Nuts
    GM647997Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the catalytic converter guard. Refer to Catalytic Converter Guard Replacement .
  3. Support the transmission with a transmission jack.
  4. Remove the two nuts securing the transmission mount to the transmission support.
    5. Fig 2: Transmission Mount
    GM793590Courtesy of GENERAL MOTORS CORP.
  5. Raise the transmission off of the transmission support.
  6. Remove the bolts.
scientia non olet · About LEMON Manuals