LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions >> Transmission Fluid Auxiliary Cooler Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Auxiliary Oil Cooler
    GM863001Courtesy of GENERAL MOTORS CORP.
  1. Remove the transmission fluid cooler hoses from the transmission fluid auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  2. Remove the bolts from the auxiliary oil cooler.
  3. Remove the auxiliary oil cooler from the vehicle.
scientia non olet · About LEMON Manuals