LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions >> Automatic Transmission Control Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Center Console Bolts
    GM815938Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor console. Refer to Console Replacement in Instrument Panel, Gauges and Console.
    2. Fig 2: View Of shift Control Cable & Shifter
    GM744173Courtesy of GENERAL MOTORS CORP.
  2. Remove the end of the range selector cable (1) from the transmission control ball stud.
  3. Remove the range selector cable (2) from the floor shift control.
    4. Fig 3: Transmission Control & Bolts
    GM745783Courtesy of GENERAL MOTORS CORP.
  4. Remove the transmission control bolts.
  5. Remove the transmission control.
scientia non olet · About LEMON Manuals