LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions >> 1-2 Accumulator Disassemble

1-2 Accumulator Disassemble

    Fig 1: View Of 1-2 Accumulator Components
    GM1220943Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Some models may not use a 1-2 accumulator spring - inner (104) or outer (54).
  1. Blow air into the 1-2 accumulator housing (57) to remove the 1-2 accumulator piston (56).
  2. Remove the 1-2 inner (104) and outer (54) accumulator springs.
scientia non olet · About LEMON Manuals