LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Shift Interlock Solenoid >> Service and Repair

Shift Interlock Solenoid: Service and Repair



Automatic Transmission Shift Lock Actuator Replacement

Removal Procedure





1. Remove the console.





2. Disconnect the Shift Lock Actuator electrical connector (3).
3. Remove the Shift Lock Actuator fasteners and remove Actuator (2).

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions

Install the Shift Lock Actuator onto the shift selector and install fasteners (2).
^ Tighten the shift lock actuator fasteners to 2 Nm (18 inch lbs.).
2. Connect the electrical connector (3).





3. Install the console.
scientia non olet · About LEMON Manuals