Air Bag Deactivation Switch: Service and Repair

INFLATABLE RESTRAINT INSTRUMENT PANEL (I/P) MODULE DISABLE SWITCH REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel trim bezel.

CAUTION: Refer to SIR Caution in Service Precautions.




2. Remove the I/P module switch from the lower right opening of the switch plate panel.
3. Disconnect the I/P module switch electrical connector.

INSTALLATION PROCEDURE
1. Connect the I/P module switch electrical connector.




2. Install the I/P module switch into the lower right opening of the switch plate panel.
3. Install the instrument panel trim bezel.