Kick-Up Panel Replacement - Front Floor

Kick-Up Panel Replacement - Front Floor

Removal Procedure





1. Remove the front door sill plate. Refer to Door Sill Plate Replacement - Front (Door Sill Plate Replacement - Front) .
2. Firmly grasp and gently pull the front floor kick-up panel to disengage the retaining clips.
3. Remove the front floor kick-up panel from around the hood release lever, if necessary.
4. Inspect for broken or missing retaining clips and replace as necessary.



Installation Procedure





1. Install the front floor kick-up panel around the hood release lever.
2. Align the retaining clips with the openings in the body.
3. Gently press to fully seat the retaining clips .
4. Install the front door sill plate. Refer to Door Sill Plate Replacement - Front (Door Sill Plate Replacement - Front) .