Diagnostic Aids
- When the instrument cluster detects low voltage at the ignition 1 voltage circuit, the instrument cluster will not communicate with the scan tool, and the odometer and PRNDL displays will not be illuminated. The season odometer will display if the trip reset switch is pressed, and the instrument cluster will communicate with the scan tool until the trip reset switch is released.
- An intermittent condition is likely to be caused by an open condition in the ignition 1 voltage circuit.
- DTC B1372 can only be read by the scan tool as a history code once the fault is removed. Refer to Scan Tool Does Not Communicate with Class 2 Device in Computer/Integrating Systems for diagnosis of a loss of communication with the instrument cluster.