LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 V8-6.0L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Gear >> Service and Repair >> Steering Gear Check Valve Replacement

Steering Gear Check Valve Replacement

STEERING GEAR CHECK VALVE REPLACEMENT - OFF VEHICLE

Disassembly Procedure






IMPORTANT: Do not to damage the threads of the steering gear housing when removing the check valve. Remove the check valve (1) from the steering gear housing (2) using a small screwdriver.

Assembly Procedure




Install the check valve (1) using a 9.52 mm inch diameter piece of tubing 100 mm (4 in) long to drive into the steering gear housing.
scientia non olet · About LEMON Manuals