LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 V8-6.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Drive Belt Tensioner Replacement - Accessory

Drive Belt Tensioner Replacement - Accessory

DRIVE BELT TENSIONER REPLACEMENT - ACCESSORY

REMOVAL PROCEDURE




1. Remove the accessory drive belt.
2. Remove the drive belt tensioner bolts.
3. Remove the drive belt tensioner.

INSTALLATION PROCEDURE




1. Install the drive belt tensioner.
2. Install the drive belt tensioner bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Tighten the drive belt tensioner bolts.

Tighten
Tighten the accessory drive belt tensioner bolts to 50 N-m (37 lb ft).

4. Install the accessory drive belt.
scientia non olet · About LEMON Manuals