Air Dam: Service and Repair

Hood Air Grille Replacement

Removal Procedure

1. Open the hood.
2. Remove the hood insulator. Refer toHood Insulator Replacement (Service and Repair) .




3. Remove the 4 nuts (2) retaining the grille to the hood.
4. Remove the grille (1) from the hood.



Installation Procedure





1. Align the hood air grille (1) to the hood.

Notice: Refer to Fastener Notice Service Precautions .

2. Install the nuts (2) retaining the grille to the hood.

Tighten the nuts to 9 Nm (7 lb ft).

3. Install the hood insulator. Refer toHood Insulator Replacement (Service and Repair) .
4. Close the hood.