Antenna Extension Cable Replacement

ANTENNA EXTENSION CABLE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the radio.
2. Remove the right sill plate.
3. Remove the right kick-up panel.
4. Disconnect the antenna extension cable (2) from the antenna cable (1).

INSTALLATION PROCEDURE




1. Open the instrument panel (I/P) door to a full down position.
2. Route the replacement coax cable alongside the existing cable using electrical tape.
3. Install the radio.
4. Connect the antenna extension cable (2) to the antenna cable (1).
5. Install the right kick-up panel.
6. Install the right sill plate.