LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Accessory Right >> Installation Procedure

Installation Procedure

    Fig 1: I/P Accessory Right Trim Panel
    GM832836Courtesy of GENERAL MOTORS CORP.
  1. Align the trim pad with the I/P substrate tabs.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the trim panel screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) .
  4. Install the I/P assist handle. Refer to Instrument Panel (I/P) Assist Handle Replacement .
scientia non olet · About LEMON Manuals