LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Latch Replacement - Console Compartment Door >> Installation Procedure

Installation Procedure

  1. Install the latch by pressing inwards until it is seated.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the latch screws.

    Tighten:  Tighten the latch screws to 1.6 N.m (14 lb in).

  3. Install the inside panel.
    4. Fig 1: Console Compartment Center Door Latch
    GM838962Courtesy of GENERAL MOTORS CORP.
  4. Install the console door inner screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

    5. Fig 2: Compartment Door & Console
    GM838971Courtesy of GENERAL MOTORS CORP.
  5. Inspect the top compartment door operation.
  6. Install the compartment door to the console. Refer to Door Replacement - Console Compartment Center .
scientia non olet · About LEMON Manuals