LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Insulator Replacement - Instrument Panel (I/P) >> Installation Procedure

Installation Procedure

  1. Install the insulator (1) to the instrument panel.
    2. Fig 1: Insulator & Instrument Panel
    GM787371Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the retaining bolts.

    Tighten:  Tighten the bolts to 1.6 N.m (14 lb in)

scientia non olet · About LEMON Manuals