Recommended Idler Arm Grease Fitting Due to Limited Access (03-00-90-001B)
Publication date: 2006-01-20Reference number: 03-00-90-001B
Recommended Idler Arm Grease Fitting Due to Limited Access
TECHNICAL SERVICE BULLETIN
Reference Number(s): 03-00-90-001B, Date of Issue:
January 20, 2006
| Affected Model(s): | 2003-2006 HUMMER H2 |
| Supercedes: | This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 03-00-90-001A (Section 00 - General Information). |
SERVICE INFORMATION
The idler arm on the HUMMER H2 has a grease fitting near the top end of the shaft facing the right-hand frame rail. Access to this fitting is very limited and may be accomplished, although not easily, with the use of a 90° grease gun adapter. However, to assure an adequate lubrication at each maintenance interval, it is recommended that the grease fitting be replaced with a 90° style fitting, P/N 09417903, pointing upward.
Parts Information
Parts Information
| Part Number | Description |
|---|---|
| 09417903 | 90° Grease Fitting |
Warranty Information
For vehicles repaired under warranty, use:
Warranty Information
| Labor Operation | Description | Labor Time |
|---|---|---|
| E7939 | Fitting, Grease - Replace | 0.3 hr |