Upper Windshield Molding Now Available - Molding Gaps to Roof (05-08-48-002A)
Publication date: 2005-09-23Reference number: 05-08-48-002A
Supersedes refnos: 05-08-48-002
Upper Windshield Molding Now Available - Molding Gaps to Roof
TECHNICAL SERVICE BULLETIN
Reference Number(s): 05-08-48-002A, Date of Issue:
September 23, 2005
| Affected Model(s): | 2003-2005 HUMMER H2 |
| Supercedes: | This bulletin is being revised to change the part number. Please discard Corporate Bulletin Number 05-08-48-002 (Section 08 - Body and Accessories). |
SERVICE INFORMATION
The purpose of this bulletin is to announce that the upper windshield reveal molding is now available separately from the windshield. It will no longer be necessary to order the windshield in order to get the molding. This molding, P/N 15277089, will correct a gap condition between the roof header and the molding in most cases.