LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Interior/Exterior Trim >> 2003, 2004, 2005 HUMMER H2 "A" Pillar Reveal Molding Rattle (HUS20050037)

2003, 2004, 2005 HUMMER H2 "A" Pillar Reveal Molding Rattle (HUS20050037)

Publication date: 2005-04-22
Reference number: HUS20050037

2003, 2004, 2005 HUMMER H2 "A" Pillar Reveal Molding Rattle

2003, 2004, 2005 HUMMER H2 "A" Pillar Reveal Molding Rattle

TECHNICAL SERVICE BULLETIN

Reference Number(s): HUS20050037, Date of Issue:  April 22, 2005
Affected Model(s): 2003-2005 HUMMER H2

SERVICE INFORMATION

A large number of H2 "A" pillar reveal moldings have been returned through the Warranty Parts Center (WPC) with the customer complaint of a "rattle." The molding should not be replaced for this condition. Remove the molding and place double-sided tape under the entire inboard edge where the molding contacts the windshield. Clean the windshield where the tape will make contact and reinstall the molding. This is, in fact a more reliable repair than replacing the molding.