LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Wheel Drive Shafts >> Diagnostic Information and Procedures >> Clunk Noise When Accelerating During Turns

Clunk Noise When Accelerating During Turns

Clunk Noise When Accelerating During Turns

Step Action Yes No
1 Check for worn or damaged outer CV joints and/or seals.
Are the outer CV joints/seals worn?		 Go to Step 2  System OK
2 Replace the outer CV joints/seals. Refer to Wheel Drive Shaft Outer Joint and Seal Replacement .
Is the repair complete?		 System OK -
scientia non olet · About LEMON Manuals