LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Self Diagnostics >> Diagnostic System Check - Hydraulic Brakes >> Test Description

Test Description

The numbers below refer to the step numbers on the DIAGNOSTIC TABLE .

  1. 2)  Lack of communication may be due to a partial malfunction of the serial data circuit or due to a total malfunction of the serial data circuit. The specified procedure will determine the particular condition.
  2. 4)  The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile the available information before tests are performed.