LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Disc Brake Hardware >> Removal (Rear)

Removal (Rear)

  1. Raise and support the vehicle. Remove the tire and wheel assembly. Remove the caliper from the mounting bracket and support the caliper with heavy mechanic's wire or equivalent. See BRAKE CALIPER . DO NOT disconnect the hydraulic brake flexible hose from the caliper.
  2. Remove the rear disc brake pads from the disc brake caliper mounting bracket. See BRAKE PADS . Remove the disc brake pad retainers from the disc brake caliper mounting bracket.
  3. Inspect the rear disc brake hardware. See DISC BRAKE MOUNTING & HARDWARE  under ADJUSTMENTS & INSPECTION.
  4. Remove the caliper pins from the disc brake caliper mounting bracket. Remove the caliper pin boots from the disc brake caliper mounting bracket.
scientia non olet · About LEMON Manuals