LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Replacement - Console Upper >> Removal Procedure

Removal Procedure

    Fig 1: Console Upper Trim Panel
    GM816360Courtesy of GENERAL MOTORS CORP.
  1. Remove the shift handle. Refer to Floor Shift Control Knob Replacement in Automatic Transmission.
  2. Remove the console storage bin. Refer to Console Storage Bin Replacement .
  3. Remove the cup holder/PRNDL assembly. Refer to Cupholder Replacement .
  4. Remove the center console end panel. Refer to Center Console End Panel Replacement .
  5. Pull upwards on the upper console trim panel to release the trim panel clips.
  6. Remove the upper console trim panel.
scientia non olet · About LEMON Manuals