LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Removal Procedure

Removal Procedure

  1. Loosen and move reward center console for access to knee bolster bolt. Refer to Console Replacement .
  2. Remove the instrument panel cluster (IPC) trim. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
    3. Fig 1: Knee Bolster Trim Panel
    GM832830Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws/bolts that hold knee bolster trim panel to I/P.
  4. Remove the knee bolster trim.
scientia non olet · About LEMON Manuals