LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Knee Bolster Trim Panel
    GM832830Courtesy of GENERAL MOTORS CORP.
  1. Install the knee bolster trim panel to I/P.
  2. Install the knee bolster trim panel screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Install the IPC trim. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  4. Align and move forward center console in place and fasten to center console bracket. Refer to Console Replacement .
scientia non olet · About LEMON Manuals