LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Center >> Installation Procedure

Installation Procedure

  1. Align the trim pad with the I/P tabs.
  2. Fig 1: I/P Center Trim Panel
    GM832824Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices
  3. Fasten the trim panel to the I/P.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).