LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) Upper >> Removal Procedure

Removal Procedure

IMPORTANT: All trim panels on the instrument panel must be removed to gain access to the upper trim panel. Also the center console has to be loosened and moved back to gain access to the center stack panel.
    Fig 1: I/P Upper Trim Pad
    GM832820Courtesy of GENERAL MOTORS CORP.
  1. Move back center console. Refer to Console Replacement .
  2. Remove the assist handle from the instrument panel. Refer to Instrument Panel (I/P) Assist Handle Replacement .
  3. Remove the door striker from the IP compartment. Refer to Striker Replacement - Instrument Panel (I/P) Compartment .
  4. Remove the trim panel from the IP cluster. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  5. Remove the IP compartment door. Refer to Compartment Replacement - Instrument Panel (I/P) .
  6. Remove the knee bolster from the IP compartment. Refer to Trim Panel Replacement - Knee Bolster .
  7. Remove the right trim plate from the IP. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Right .
  8. Remove the left trim plate from the IP. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Left .
  9. Remove the center trim panel from the IP compartment. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
  10. Remove the right trim panel accessory from the IP.
  11. Remove the upper trim pad from the IP.
scientia non olet · About LEMON Manuals