LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Striker Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

    Fig 1: I/P Compartment Striker Assembly
    GM838942Courtesy of GENERAL MOTORS CORP.
  1. Install striker bracket to instrument panel subscript loosely.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Align striker with I/P compartment door and tighten striker bracket in place.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).