LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Lock Cylinder Replace - Console Compartment Door >> Removal Procedure

Removal Procedure

  1. Remove the console compartment door from the center console. Refer to Door Replacement - Console Compartment Center .
  2. Place the compartment door on a work bench.
    3. Fig 1: Console Compartment Center Door Latch
    GM838962Courtesy of GENERAL MOTORS CORP.
  3. Remove the 11 retaining screws.
  4. Remove the inside panel to gain access to the lock cylinder.
    5. Fig 2: Locating Lock Cylinder Retaining Clip
    GM826120Courtesy of GENERAL MOTORS CORP.
  5. Remove the lock cylinder retaining clip (1) from the latch assembly.
  6. Remove the lock cylinder from the latch assembly by pressing outwards.
scientia non olet · About LEMON Manuals