LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Handle Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

  1. Install new handle assembly to compartment door.
  2. Ensure the linkage for the top compartment door are all connected before installing the inside panel.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the inside panel screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  4. Inspect the operation of the top compartment door
    5. Fig 1: I/P Compartment Door Hinge
    GM816341Courtesy of GENERAL MOTORS CORP.
  5. Install the compartment door to the I/P. Refer to Door Replacement - Instrument Panel (I/P) Compartment .
scientia non olet · About LEMON Manuals