LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bracket Replacement - Steering Column >> Removal Procedure

Removal Procedure

  1. Loosen and move center console reward for access to the knee bolster bolt. Refer to Console Replacement .
  2. Remove the screws/bolts that hold the knee bolster trim panel to the I/P. Refer to Trim Panel Replacement - Knee Bolster .
    3. Fig 1: Steering Column Bracket
    GM832829Courtesy of GENERAL MOTORS CORP.
  3. Remove the nuts that hold the knee bolster deflector to the I/P.
scientia non olet · About LEMON Manuals