LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) Center Support >> Removal Procedure

Removal Procedure

  1. Remove the center console from the center console bracket. Refer to Console Replacement .
  2. Remove the extension panel from the I/P. Refer to Instrument Panel (I/P) Extension Trim Plate Replacement .
    3. Fig 1: I/P Carrier Center Support Bracket Nut
    GM832818Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt holding the bracket assembly-I/P center.
    4. Fig 2: I/P Center Support Bracket
    GM832819Courtesy of GENERAL MOTORS CORP.
  4. Remove the bracket from the I/P and floor.
scientia non olet · About LEMON Manuals