LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hummer
>>
2003
>>
H2
>>
Repair and Diagnosis (Single Page)
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Instrument Panel, Gages, And Console
>>
Diagnostic Information & Procedures
>>
DTC B0540: Driver State Mismatch
>>
Conditions for Setting the DTC
Conditions for Setting the DTC
The IPC detects that the commanded state of the driver and the actual state of the control circuit do not match.
The condition above must be present for a minimum of 5 seconds.