LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hummer
>>
2003
>>
H2
>>
Repair and Diagnosis (Single Page)
>>
Accessories & Equipment
>>
Communication Devices
>>
Data Link Communications
>>
Diagnostic Information and Procedures
>>
DTC U1000 and U1255: Critical Operating Parameter Has Not Been Received
>>
Conditions for Running the DTC
Conditions for Running the DTC
Voltage supplied to the module is in the normal operating voltage range of 9-16 volts.
DTCs U1300, U1301 or U1305 do not have a current status.
The vehicle power mode requires serial data communication to occur.