Wireless Seat Belt Reminder Symptom Troubleshooting - The buckle state is stuck at "unbuckled," regardless of the actual state of the buckle: Notes

How to use this manual .

NOTICE:  

• Before doing this troubleshooting procedure, review How to Troubleshoot .
• Troubleshoot the following DTCs first, if stored at the same time.
  • Wireless Seat Belt Reminder System [TPMS/Wireless Seat Belt Reminder System]: B0054-A2 .

NOTE: 

• Keep electronic devices and metal objects away from the seat belt reminder transceiver, as these can interfere with the radio signals and cause this symptom.
• If the DTCs with F-CAN failure is stored in the body control module, the CAN gateway, and the gauge control module, perform the failure diagnosis of the displayed DTCs first.