DTC B12E0

DTC B12E0  : Electric steering lock switch internal error

DTC (Power Control Unit)

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

1. Problem verification

   -1. Clear the DTCs with the HDS.

   Clear DTCs

   -2. Do this procedure ten times: Press the engine start/stop switch to select the OFF (LOCK), ACCESSORY, ON, and OFF (LOCK) mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   B12E0 Electric steering lock switch internal error

   Is DTC B12E0 indicated?

   YES 

   Replace the steering lock .

   NO 

   Intermittent failure, the system is OK at this time.