DTC B2616
DTC B2616 : Rear 3rd sensor failure
| DTC Description | DTC |
|---|---|
| B2616 Rear 3rd sensor failure |
DTC (Parking and Back-Up Sensor Control Unit)
NOTE:
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .
- The connection order of the sensor is 1st (left corner sensor) -> 2nd (left center sensor) -> 3rd (right center sensor) -> 4th (right corner sensor) from the side near the control unit.
- Problem verification
-1. Clear the DTCs with the HDS.
Clear DTCs
-2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
-3. Wait for at least 6 seconds.
-4. Check for DTCs with the HDS.
DTC Description DTC B2616 Rear 3rd sensor failure Is DTC B2616 indicated?
YES
Replace the right rear center sensor .
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.