DTC B2614

DTC B2614  : Rear 1st sensor failure

DTC (Parking and Back-Up Sensor Control Unit)

NOTE: 

• If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .
• The connection order of the sensor is 1st (left corner sensor) -> 2nd (left center sensor) -> 3rd (right center sensor) -> 4th (right corner sensor) from the side near the control unit.

1. Problem verification

   -1. Clear the DTCs with the HDS.

   Clear DTCs

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Wait for at least 6 seconds.

   -4. Check for DTCs with the HDS.

   DTC Description	DTC
   B2614 Rear 1st sensor failure

   Is DTC B2614 indicated?

   YES 

   Replace the left rear corner sensor .

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.