DTC : U3000-51

DTC U3000-51  : Multipurpose Camera Unit Update Incomplete

NOTE:  Before you troubleshoot, review the general troubleshooting information - Go to:

1. Multipurpose camera unit check (update)

   - 1. Update the Multipurpose Camera Unit Update if it does not have the latest software.

   - 2. Turn the vehicle to the OFF (LOCK) mode.

   - 3. Turn the vehicle to the ON mode, then wait for at least 5 seconds.

   - 4. Check for DTCs with the HDS.

   Is DTC U3000-51 indicated?

   YES 

   Check for loose terminals in the multipurpose camera unit 20P connector. If the multipurpose camera unit was updated and the symptom/indication is still present, replace the Multipurpose Camera Unit .

   NO 

   Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.