DTC : B264D

DTC B264D  : Front Sensor Combination Error

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Go to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks .

DTC (Parking and Back-Up Sensor Control Unit)

1. Problem verification

   - 1. Clear the DTCs with the HDS.

   Clear DTCs

   - 2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   - 3. Wait for at least 6 seconds.

   - 4. Check for DTCs with the HDS.

   DTC Description	DTC
   B264D Front sensor combination error

   Is DTC B264D indicated?

   YES 

   Replace the Parking and Back-Up Sensor Control Unit .

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.