DTC : B18BA, B1E6A
DTC B18BA : Different Version in the Left and Right Side BSI Radar Unit
DTC B1E6A : Different Version in the Left and Right Side BSI Radar Unit
NOTE: Before you troubleshoot, review the general troubleshooting information - Refer to:
How to Troubleshoot the Blind Spot Information System/Cross Traffic Monitor (2016 2017 2018) or
How to Troubleshoot the Blind Spot Information System/Cross Traffic Monitor (2019 2020 2021) .
| DTC Description | DTC |
|---|---|
| B18BA Different Version in the Left and Right Side BSI Radar Unit | |
| B1E6A Different Version in the Left and Right Side BSI Radar Unit |
DTC (BSI)
- Problem verification
-1. Turn the vehicle to the ON mode.
- 2. Clear the DTC with the HDS.
Clear DTCs
- 3. Turn the vehicle to the OFF (LOCK) mode.
- 4. Turn the vehicle to the ON mode, then wait for at least 5 seconds.
- 5. Check for DTCs with the HDS.
DTC Description DTC B18BA Different Version in the Left and Right Side BSI Radar Unit B1E6A Different Version in the Left and Right Side BSI Radar Unit Is DTC B18BA or B1E6A indicated?
YES
An incorrect BSI radar unit is installed. Replace the appropriate BSI Radar Unit - Removal and Installation with the proper part.
NO
Intermittent failure, the system is OK at this time. Go to intermittent failures troubleshooting - Refer to:
How to Troubleshoot the Blind Spot Information System/Cross Traffic Monitor (2016 2017 2018) or
How to Troubleshoot the Blind Spot Information System/Cross Traffic Monitor (2019 2020 2021) .