DTC : U3000-51

DTC U3000-51  : CAN Gateway Programming Error

NOTE: 

• Before you troubleshoot, review the general troubleshooting information - Refer to:

  How to Troubleshoot the Fuel and Emissions Systems,

  How to Troubleshoot the A/T System (6-Speed A/T)

  How to Troubleshoot the A/T System (9-Speed A/T)

  How to Troubleshoot the Brake Booster Pressure Monitoring System

• This DTC is indicated when the CAN gateway update is not completed.

DTC (CAN GATEWAY)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   - 2. Clear the DTC with the HDS.

   Clear DTC

   - 3. Turn the vehicle to the OFF (LOCK) mode.

   - 4. Turn the vehicle to the ON mode.

   - 5. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-51 CAN Gateway Programming Error

   Is DTC U3000-51 indicated?

   YES 

   Reprogram the CAN Gateway - Update (2019 2020 2021) .

   NO 

   Intermittent failure, the system is OK at this time.